Universal Remote Codes List: Match Your Remote Version

Short answer: A reliable universal remote codes list must match the remote’s model, revision, and device type before you use any number.
Three-, four-, and five-digit lists circulate online, but their lengths do not identify a universal standard. A GE remote with one code-list revision and an RCA remote can have different libraries for the same television. Jasco’s official site asks for model and CL version; RCA provides a revision-aware code finder. This guide explains how to select the right list, organize the TV entries, and avoid a partial power-only match.
1. Choose a List by Remote, Not TV Brand: Universal Remote Codes List

The first table should identify the source: GE/Jasco versioned list, RCA revision finder, or the booklet supplied with another remote. Then choose TV and its brand. A universal remote codes list lookup begins with the handheld controller’s own printed identifier; the TV logo alone is insufficient.
| Remote family | Official route | Match first |
| GE / Jasco | Jasco code list or support | Version and remote model |
| RCA | RCA code finder | Remote model or revision |
| Other | Maker manual | Exact identifier and device mode |
Remote maker and model
Look under the battery cover and at the rear label for the full identifier. Jasco specifically notes CL3, CL4, CL5, or CL6 versions; RCA has a separate revision lookup. A search for “Samsung TV code” without the remote model leaves out the most important variable.
Read more: Universal Remote Codes for TV: Find the Right Code List
Device mode
TV codes differ from audio, DVD, and cable-box entries even within one booklet. Select the TV mode or device button before entering a number. If you want a soundbar, use the appropriate audio device list instead of forcing a TV code to control both.
A universal remote codes list without the handheld model is like a key without a lock label. Start by identifying the actual remote and its code library before scanning alphabetized TV brands. Jasco and RCA both direct customers through version or revision information. If a page offers one table for every GE and RCA product, verify it against the maker’s source before using the numbers.
Keep the original code sheet, remote model label, and the number of digits together. Printed sheets sometimes cover several hardware revisions; the configuration instructions on the remote’s packaging determine which column applies. A television brand can have multiple candidate entries because its products and command sets changed over time. Mark a candidate as tested only after checking power, menu, volume, and input. If one function fails, try the next candidate listed for that exact revision before blaming the TV.
2. Understand 3-, 4-, and 5-Digit Codes
Code length follows the programming library of the controller. A number with the wrong length may be rejected or interpreted differently. For universal remote codes list, the controller model and code-list revision determine which digits can have meaning.
Three-digit legacy lists
Some older remotes accept three-digit entries. That does not mean a modern four-digit remote can drop the first digit from a listing. Read the original model manual and use its own table. An online list that combines lengths without device identifiers is not enough evidence. For a step-by-step lookup, see how to find the right TV code for a universal remote using the controller’s exact model and code-list version.
Four- and five-digit lists
Many current manuals use four or five digits, depending on maker and model. A leading zero can be meaningful and should not be removed. Confirm the required digit count in the remote’s programming instructions before copying a TV brand entry.
The universal remote codes list may include leading zeros. Preserve them in a four- or five-digit entry; removing one changes the sequence sent during programming. An older three-digit list is not made compatible with a newer remote by padding it arbitrarily. Read the programming instructions for the exact digit count and indicator behavior, then use only that list’s TV device entries.
Write the code together with its remote revision; a bare number is not reusable instructions. If a household has two universal remotes, label each note by controller model so a family member does not accidentally apply the wrong library.
3. Find the GE or Jasco Version

Jasco’s official universal remote code page is organized around the model and code-list revision printed on the remote. Read the universal remote codes list entries in the TV category of that exact maker’s document before pressing setup keys. For a Samsung television, the Samsung TV code guide explains why the correct entry still depends on the remote manufacturer and model.
Read CL3 through CL6 carefully
Remove the battery cover and note the CL marking and model. Restore the batteries, open Jasco’s matching list, then locate the TV brand. If the list offers several codes, start at the beginning and test each. A code from CL4 may not be valid for a CL6 controller.
Use the official instructions
Jasco’s FAQ explains direct code entry and automatic code search. The setup gesture can vary by model; follow the exact remote documentation. Keep the list version with the code in a note so someone can reprogram the controller after a battery change.
A universal remote codes list from Jasco is selected by the CL revision printed on a particular controller. Store this revision with any code that works. If the battery cover is replaced or the printed booklet is lost, the saved note will still identify the right list. A household with two GE remotes should not assume the same CL version even if their button layouts look alike.
4. Find the RCA Revision
RCA’s official code finder asks for the remote and revision rather than presenting one undifferentiated brand table. During universal remote codes list entry, follow the indicator sequence in the matching remote manual and save one candidate at a time. If you have a Roku TV, check the guidance on four-digit universal remote codes for Roku TV and confirm that your controller uses the same code system.
Locate the revision number
Follow RCA’s “Find Remote Revision Number” guidance, then enter it into the Remote Code Finder. Choose TV and the television brand. If the page returns multiple entries, test each using the RCA manual for that controller.
Do not mix RCA and GE numbers
A number copied from a GE list is not automatically meaningful on an RCA remote. Even if a power command happens to work, other keys may be wrong. Preserve the remote maker and revision beside every code in any household cheat sheet.
RCA’s universal remote codes list route begins at its Remote Code Finder and revision identifier. Write down the remote model, revision, TV brand, and returned candidate before testing. If several entries appear, test them in sequence and record results. Copying only a number into a note makes it impossible to know later which remote or TV it belonged to.
Read more: Hisense TV Code for Universal Remote: Verified Codes and Programming Steps
5. Build a Useful TV Code Table

A personal list should include more than digits. Add remote model, revision, TV model, and what each tested code can do. A universal remote codes list result passes only when power, volume, input, and the required menu keys perform the expected actions.
| Record | Example field | Why it matters |
| Remote | Maker + revision | Determines database |
| TV | Exact model | Narrows compatibility |
| Results | Power / volume / input | One key is not enough |
Record the context
Use columns for remote brand/model, code-library version, TV brand/model, tested code, and working keys. That format prevents the common error of using a code from a different controller. Date the note when you replace the remote or television.
Mark partial matches
A power-only entry can be a useful clue but should not be labeled fully compatible. Test volume, mute, menu, and input. If a second entry handles those functions better, keep that one and note any remaining feature limitations.
A useful universal remote codes list kept at home is a tested matrix, not a long unfiltered download. Mark power, volume, mute, input, and menu for each candidate. Keep a partial match in a separate note rather than deleting it, because it can help diagnose whether a later soundbar or input problem is external to the TV. Recheck after changing the television.
Treat a leading zero as part of the code. A printed sequence is not an integer to simplify. Keep the original spacing and digit count from the official list, then follow the remote’s exact entry method. For an overview of direct entry and code search, follow the steps for programming a universal remote to a TV alongside the instructions for your specific controller.
A useful personal lookup table records the remote manufacturer, precise model or revision, device type, candidate entry, and a small results column for each important button. Write it on paper or in a private note; there is no need to publish a questionable combined table online. The code belongs to the remote’s internal database, so the same digits cannot be assumed to mean the same command set on another manufacturer’s controller. If the remote was bought used without a manual, obtain the matching current support sheet first.
6. Search When a List Has No Match
Auto code search uses the library stored in the remote, avoiding manual entry of every printed candidate. Use universal remote codes list search mode only as that remote’s manufacturer describes; it searches the remote’s built-in library.
Follow the maker’s search mode
Jasco and RCA publish search guidance for supported models. Point the remote at the powered TV and follow the documented key sequence. When the TV reacts, save the result as instructed. Search may take several cycles and can stop on a partial match.
Verify the saved result
After search, test the same key set used for direct entry. A remote that only toggles power may need another search pass. If nothing works, the TV or remote may be unsupported; a different list from an unrelated revision is not a safe fix.
If the universal remote codes list for your TV brand has no working entry, the manufacturer’s automatic search can be the next step. It still uses the remote’s internal library and may locate a different profile. Once the screen responds, save the result and repeat the button test. A result that only toggles power is not the same as complete support.
Read more: 4 Digit Universal Remote Codes for Roku TV
7. Avoid Misleading Internet Lists

A page can rank for universal remote codes list while omitting the remote model entirely. That makes its numbers impossible to validate. A failed universal remote codes list candidate can mean wrong revision, incorrect device mode, or an incomplete command match.
Check provenance
Prefer the controller maker’s own manual, code finder, or downloadable list. Check whether the page specifies version and device mode. A bare table of brands and numbers without those fields is a lead to verify, not an authoritative instruction.
Beware copied code tables
A number may have been copied from a cable remote, another maker, or an older revision. If the programming indicator rejects it or buttons map strangely, return to the original source. Do not keep entering random codes into a TV menu; universal remote programming occurs on the handheld controller.
An online universal remote codes list can look authoritative while mixing device categories. Check whether a number came from TV, audio receiver, cable box, or streaming-player section. A Roku TV panel and a Roku HDMI stick are different targets. When provenance is missing, return to the controller maker’s list rather than trying every number on the page.
8. Smart TV and Streaming Device Exceptions
A Roku TV, Fire TV, or Google TV can be controlled by its platform remote while a basic universal IR remote may only cover a subset of TV hardware keys. Compare universal remote codes list examples by manufacturer and revision instead of copying an isolated number from a brand chart.
TV brand versus streamer
A Roku stick on an HDMI input is not the same target as the television panel. Choose the TV brand in the controller’s TV list for panel power or input, and a separate supported device profile for the streaming player if available. For a practical brand example, compare the Hisense TV universal remote codes documented for specific remote models before selecting a candidate.
Voice and wireless keys
Bluetooth voice commands and proprietary smart functions are not guaranteed by a basic IR code. A model-matched original remote or platform app may retain those features. The is a network-control alternative for supported online televisions, not a universal code generator.
For a universal remote codes list involving a smart TV, set expectations: the infrared entries may operate basic television hardware while voice search or Bluetooth controls remain on the original remote. A phone platform app can be a backup when the TV is connected, but it is not a substitute for identifying the physical remote’s code revision.
When a code is saved, document which keys were tested. This turns a vague “works” label into a useful reference and makes the next troubleshooting step obvious if only soundbar volume or HDMI input is missing.
Sources: and . Match the printed revision before entering digits.
If the television itself is a supported smart model, is another option to assess after the official device method. Check the current listing and in-app purchase terms, then test navigation, power, and volume on your actual setup. It cannot add IR hardware or restore an offline device.
9. Troubleshoot a Code List Entry

If a candidate fails, confirm batteries, programming mode, correct device button, and line of sight before abandoning the list. If universal remote codes list setup remains incomplete, preserve the model information for official support or a matched replacement.
Rejected during entry
A blinking indicator or timeout may mean the remote did not accept the full code. Repeat the maker’s sequence with fresh batteries and the correct digit count. Check leading zeros. If the remote model label differs from the page, switch to the right list.
Accepted but wrong behavior
Test another code under the same TV brand and revision. A partial match can turn the set on but fail menu or volume. If all official entries fail, use code search or confirm model compatibility with the maker rather than a random cross-brand list.
When a universal remote codes list entry is rejected, check setup mode, batteries, device key, and the exact number of digits. When entry is accepted but commands are wrong, move to the next official entry. These two outcomes need different fixes. Do not factory reset the TV to resolve a programming indicator on the handheld remote.
If every listed candidate changes power but none changes volume, check whether volume has been assigned to an audio receiver or soundbar. Some universal controllers support volume punch-through, while others need a separate audio-device setup. If no command responds, inspect batteries, entry timing, device-mode selection, and clear line of sight. Stop repeated code entry when the remote’s indicator behaves differently from the documented sequence; find its exact instructions rather than applying a button combination from a similar-looking model.
Read more: What Is the Code for TCL TV Universal Remote
10. Frequently Asked Questions
These answers resolve the remaining practical questions about universal remote codes list.
Are universal remote codes the same across brands?
No. The remote brand, model, and library revision determine which code entries and programming steps apply.
Can I use a four-digit code in a five-digit remote?
Only if that remote’s own manual explicitly supports it. Do not add or remove digits from a different maker’s list.
Where do I find GE codes?
Use Jasco’s official universal remote codes page after checking the model and CL version inside the battery compartment or underside.
What if no code controls all buttons?
Try other official brand entries and the model’s auto search. Some smart or voice functions require a platform-specific remote or supported app.
11. Final Thoughts
The best universal remote codes list is the one tied to the exact handheld controller. Record the model, revision, TV device mode, and tested functions with every entry; if direct codes fail, use the maker’s auto search or a compatible replacement.